Mapper
Mappers / Mapper
Code File Location: VisualSim/actor/lib/Task_Basic
o Multiple flows in the model at different levels of hierarchy needs to access the same timed resource.
o Model multi-threaded applications.
o Dynamically allocate the incoming request to one of many resources.
This block works with the separation of the behavior and architecture methodology. In this methodology, the mapper block is placed in behavior flow at every location where a timed resources is required. This block consumes zero time, contains no queue and has no arbitration.
The Mapper block is used in conjunction with the SystemResource blocks. The block takes the incoming Data Structure and send it to the Scheduler listed in the parent_scheduler_name parameter along with the information in the parameter fields. This block waits for a return and then sends the unchanged data structure on the output port. All incoming Data Structures are immediately sent to the SystemResource. The time between the input and output of a particular data structure depends on the queuing and processing delay at the Scheduler. This block can send a request to either the SystemResource or SystemResource_Extend.
Refer SystemResource usage- FCFS demo model.
Parameter |
Explanation |
Type |
Example |
Parent_Scheduler_Name |
Parameter used to identify the scheduler, whether SystemResource or SystemResource_Extend. This parameter can contain |
String |
"Parent_Scheduler" |
Task_Number |
o Plotting:
The processing period along a timeline is available on the plot_output
from the SystemResource. The duration is highlighted by a low-to-high
at the start and high-to-low at the end of the period. The Task_Number
value is the height on the Y-axis. If plotting is important, this
number must be unique. If the default is unchanged, the Task_Number = 1 |
Integer(No quotes), or field name (Within quotes) |
"Task_Numer" or 1 |
Task_Priority |
Parameter for the priority of the data structure. The priority is sent to the SystemResource and SystemResource_Extend. The queue in the SystemResource is reordered based on the priority. This field can contain an integer (No quote and fixed for all data structures) or a fieldname (Within quotes and unique for each data structure). |
Integer(No quotes), or field name (Within quotes) |
"A_Priority" or 2 or None |
Task_Time |
Parameter is the task time passed to the SytemResource for the processing. Depending on the setting of the SystemResoure, this value can be a duration of time (SystemResource is set to Relative_Time)or number of cycles(SystemResource is set to Number_Clocks). |
Integer(No quotes), or field name (Within quotes) |
"DELTA" or 2.0 |
Task_Plot_ID |
This is the height of the "number of outstanding request" plot output. This can be combined with outputs from other Mappers to plot the task operation as a waveform from the plot port. |
Integer |
1 |
Port |
Explanation |
input |
The input port. |
output |
The output port. |
plot |
The plot port. |
Created with the Personal Edition of HelpNDoc: Full-featured EBook editor